- Fast Shipping
- Huge Inventory
- Trusted by Contractors
- 24/7 Ordering
The Eaton ELSTR Wall LED Strobe is a visible fire alarm notification appliance from Eaton’s Wheelock Eluxa family. It combines energy-efficient LED technology with a low-profile wall-mount design and six field-selectable candela settings. The ELSTR has a red housing, clear lens, and FIRE lettering.
The appliance is designed for indoor 24V notification appliance circuits and can be used in both new fire alarm installations and compatible retrofit applications.
The ELSTR provides six field-selectable wall-strobe outputs:
15 cd
30 cd
75 cd
110 cd
135 cd
185 cd.
This broad range allows one appliance to accommodate both lower- and higher-intensity visible-notification requirements.
The ELSTR uses advanced LED technology as its visual light source.
Eaton states that the Eluxa platform is designed for low current draw across its candela range. Reduced power consumption can allow more appliances per notification circuit while helping reduce power-supply and battery requirements.
The exact ELSTR configuration is:
Housing: Red
Lens: Clear
Lettering: FIRE
Lamp: LED
Mounting: Wall
Environment: Indoor.
Colored-lens and alternative-lettering versions are available under separate Eluxa model numbers.
The ELSTR supports synchronized visual notification when used with compatible Wheelock fire alarm equipment.
The Eluxa product line is also UL/ULC listed for compatibility with fire alarm control panels and accessories determined to be compatible with Wheelock RSS xenon and Exceder LED3 strobe products. This makes the ELSTR useful for both retrofit and new-construction applications.
Nominal System Voltage: 24V
Current Draw (DC): Up to 0.185 A
Candela: 15 / 30 / 75 / 110 / 135 / 185 cd
Notification Type: Visible-only strobe
Technology: LED
Mounting: Wall
Operation: Indoor.
Actual notification circuit calculations should use the current associated with the selected candela and the applicable system configuration.
The Eluxa wall-mount platform is designed with a compact, low-profile enclosure. Eaton states that wall appliances extend approximately 1.18 inches from the wall, helping reduce the visual profile of the notification appliance.
The ELSTR itself is approximately 4.54 inches high × 2.78 inches wide, according to Eaton’s official product specifications.
The ELSTR includes a mounting plate with a capture-hinge design that can hold the appliance during installation. Eaton also provides pre-wire/pre-test capability, allowing field wiring and ground faults to be checked before the finished strobe is installed.
Candela selection is performed using finger-operated slide switches and does not require a special tool. The wall version uses a compact single-gang mounting design.
| Weight | 1 lbs |
|---|---|
| Dimensions | 5 × 5 × 5 in |
| Brand |
Your Payment information is processed securely. We do not store credit card details, nor have access to your credit card information.
Orders ship same day
Thousands of parts in stock
Reliable products & service
Order anytime, anywhere
The Eaton ELSTR Wall LED Strobe is a visible fire alarm notification appliance from Eaton’s Wheelock Eluxa family. It combines energy-efficient LED technology with a low-profile wall-mount design and six field-selectable candela settings. The ELSTR has a red housing, clear lens, and FIRE lettering.
The appliance is designed for indoor 24V notification appliance circuits and can be used in both new fire alarm installations and compatible retrofit applications.
The ELSTR provides six field-selectable wall-strobe outputs:
15 cd
30 cd
75 cd
110 cd
135 cd
185 cd.
This broad range allows one appliance to accommodate both lower- and higher-intensity visible-notification requirements.
The ELSTR uses advanced LED technology as its visual light source.
Eaton states that the Eluxa platform is designed for low current draw across its candela range. Reduced power consumption can allow more appliances per notification circuit while helping reduce power-supply and battery requirements.
The exact ELSTR configuration is:
Housing: Red
Lens: Clear
Lettering: FIRE
Lamp: LED
Mounting: Wall
Environment: Indoor.
Colored-lens and alternative-lettering versions are available under separate Eluxa model numbers.
The ELSTR supports synchronized visual notification when used with compatible Wheelock fire alarm equipment.
The Eluxa product line is also UL/ULC listed for compatibility with fire alarm control panels and accessories determined to be compatible with Wheelock RSS xenon and Exceder LED3 strobe products. This makes the ELSTR useful for both retrofit and new-construction applications.
Nominal System Voltage: 24V
Current Draw (DC): Up to 0.185 A
Candela: 15 / 30 / 75 / 110 / 135 / 185 cd
Notification Type: Visible-only strobe
Technology: LED
Mounting: Wall
Operation: Indoor.
Actual notification circuit calculations should use the current associated with the selected candela and the applicable system configuration.
The Eluxa wall-mount platform is designed with a compact, low-profile enclosure. Eaton states that wall appliances extend approximately 1.18 inches from the wall, helping reduce the visual profile of the notification appliance.
The ELSTR itself is approximately 4.54 inches high × 2.78 inches wide, according to Eaton’s official product specifications.
The ELSTR includes a mounting plate with a capture-hinge design that can hold the appliance during installation. Eaton also provides pre-wire/pre-test capability, allowing field wiring and ground faults to be checked before the finished strobe is installed.
Candela selection is performed using finger-operated slide switches and does not require a special tool. The wall version uses a compact single-gang mounting design.
| Weight | 1 lbs |
|---|---|
| Dimensions | 5 × 5 × 5 in |
| Brand |
There are no reviews yet.
Your Payment information is processed securely. We do not store credit card details, nor have access to your credit card information.
Select at least 2 products
to compare
Reviews
There are no reviews yet.