Description

The Edwards SIGA-SB4 Standard Detector Base is the basic 4-inch mounting base used with compatible Edwards Signature Series detectors. It provides the mechanical mounting point and Signature data-loop connections required by the installed detector.

Unlike relay or isolator bases, the SIGA-SB4 provides straightforward detector mounting and circuit connectivity without auxiliary relay or fault-isolation functions. The 4-inch version includes the SIGA-TS4 trim skirt, which conceals the mounting ears and provides a finished appearance when installed on a 4-inch square electrical box.

Product Functions

• Provides mounting for compatible Signature Series detectors
• Standard detector-base configuration
• Designed for 4-inch electrical box applications
• Includes trim skirt
• Provides Signature data-loop connections
• Supports DATA IN and DATA OUT wiring
• Supports SIGA-LED remote alarm indicator
• Provides room-side wiring access
• Supports #12, #14, #16, and #18 AWG conductors
• Contains no auxiliary relay
• Contains no integral fault isolator
• Allows compatible detector heads to be installed and replaced independently of field wiring

Standard Detector Base

Edwards identifies the:

SIGA-SB

and

SIGA-SB4

as its Standard Detector Bases for Signature Series detectors.

The SIGA-SB4 performs the same basic detector-base function while adding compatibility with a North American 4-inch square electrical box and including the associated trim skirt.

4-Inch Base Configuration

The SIGA-SB4 is specifically the 4-inch version of the standard Signature detector base.

Edwards ordering information identifies:

SIGA-SB: Standard detector mounting base

SIGA-SB4: 4-inch detector mounting base with trim skirt.

The supplied trim skirt covers the mounting ears of the base and helps provide a cleaner finished appearance around the detector installation.

Signature Series Detector Compatibility

The SIGA-SB4 is designed for compatible Edwards Signature Series detectors.

Current and legacy Edwards documentation lists it as a compatible base for detector families including intelligent optical smoke, heat, and multi-sensor devices. For example, Edwards documentation identifies SIGA-SB4 as a compatible base for SIGA-OSCD and SIGA-PD detectors.

Compatibility should still be verified against the documentation for the exact detector model being installed.

Remote LED Support

The SIGA-SB4 supports the:

SIGA-LED — Remote Alarm LED.

Dedicated terminals on the base provide connections for the remote LED, allowing alarm indication to be located away from the detector when required.

Edwards specifies a maximum resistance of:

10 Ω per wire

for the remote LED connection.

Standard Base vs. Specialty Bases

The SIGA-SB4 is intended for installations where only standard detector connectivity is required.

Edwards also offers specialty bases such as:

SIGA-RB4: Relay detector base

SIGA-IB4: Fault-isolator detector base

SIGA-AB4G Series: Audible detector bases.

The SIGA-SB4 contains neither an auxiliary relay nor a built-in line isolator, making it the straightforward standard-base option.

Electrical Information

Because the SIGA-SB4 is primarily a detector mounting and wiring interface, the intelligent sensing and operating-current specifications are determined by the detector installed on it.

Published wiring support includes:

#12 AWG / 2.5 mm²

#14 AWG / 1.5 mm²

#16 AWG / 1.0 mm²

#18 AWG / 0.75 mm².

Edwards notes that #16 and #18 AWG conductors are preferred where appropriate for easier installation.

SIGA-SB4 Datasheet