- Fast Shipping
- Huge Inventory
- Trusted by Contractors
- 24/7 Ordering
The Edwards SIGA-SD is a commercial intelligent duct smoke detector designed for compatible Edwards Signature Series fire alarm systems. It continuously samples air moving through HVAC ductwork to detect smoke before it is distributed throughout the building, helping initiate HVAC shutdown and other programmed fire alarm functions. (facpmanuals.com )
The detector combines a Signature Series smoke detector with environmental compensation, electronic addressing, self-diagnostics, maintenance reporting, and an integral Form C alarm relay. Its low-profile SuperDuct housing simplifies installation and maintenance in commercial HVAC systems. This product is intended exclusively for commercial fire alarm installations.
The SIGA-SD operates on compatible Edwards Signature Series Signaling Line Circuits (SLC) and receives operating power directly from the Signature loop. Electronic addressing is assigned automatically by the Signature Loop Controller or through compatible programming software.
An integral Form C alarm relay is provided for HVAC shutdown or auxiliary control functions. The detector also supports compatible remote alarm indicators and remote test/reset stations for convenient maintenance.
The SIGA-SD mounts directly to HVAC ductwork and utilizes separately ordered sampling tubes selected according to duct width. The sampling tube may be installed from either side of the housing and rotated to align correctly with airflow.
The clear removable cover provides convenient access to the detector, terminals, filters, sampling tube, and exhaust tube, simplifying routine inspection and maintenance without removing the housing from the duct.
Suitable for:
A duct smoke detector is intended to monitor smoke movement within HVAC systems and is not a substitute for open-area smoke detection.
Compatible with:
Always verify compatibility with the installed Edwards fire alarm control panel, Signature Loop Controller, detector model, sampling tube, duct dimensions, airflow conditions, firmware version, and project requirements before installation.
Manufacturer: Edwards
Parent Company: Carrier
Model: SIGA-SD
Series: Signature Series SuperDuct
Product Type: Intelligent Duct Smoke Detector
Detection Method: Smoke Sensing Chamber
Communication: Signature Data Circuit
Addressing: Electronic
Operating Voltage: 15.2–19.95 VDC
Air Velocity Range: 100–4,000 ft/min
Air Pressure Differential: 0.005–1.00 in. Water Column
Smoke Sensitivity: 0.79%–2.46% Obscuration per Foot
Alarm Test Response: Approximately 5 Seconds
Relay Output: One Form C Alarm Relay
Status Indicators: Green Power LED and Red Alarm LED
Wire Size: 14–22 AWG
Operating Temperature: –4°F to 158°F (–20°C to 70°C)
Operating Humidity: 10%–93% RH Non-Condensing
Dimensions: 8.70 × 5.45 × 1.90 in. (221 × 138 × 48 mm)
Sampling Tube: Ordered Separately
Application: Indoor Commercial HVAC and Fire Alarm Systems
Listings: UL Listed, ULC Listed, FM Approved, CSFM Listed, and MEA Approved (application dependent). Verify product labeling and project requirements before installation.
The Edwards SIGA-SD is designed for commercial fire alarm systems requiring smoke detection within HVAC supply and return ductwork. Typical applications include office buildings, hospitals, schools, hotels, warehouses, industrial facilities, retail centers, mechanical rooms, and other commercial occupancies utilizing compatible Edwards Signature Series fire alarm systems.
| Weight | 2 lbs |
|---|---|
| Dimensions | 7 × 7 × 6 in |
Your Payment information is processed securely. We do not store credit card details, nor have access to your credit card information.
Orders ship same day
Thousands of parts in stock
Reliable products & service
Order anytime, anywhere
The Edwards SIGA-SD is a commercial intelligent duct smoke detector designed for compatible Edwards Signature Series fire alarm systems. It continuously samples air moving through HVAC ductwork to detect smoke before it is distributed throughout the building, helping initiate HVAC shutdown and other programmed fire alarm functions. (facpmanuals.com )
The detector combines a Signature Series smoke detector with environmental compensation, electronic addressing, self-diagnostics, maintenance reporting, and an integral Form C alarm relay. Its low-profile SuperDuct housing simplifies installation and maintenance in commercial HVAC systems. This product is intended exclusively for commercial fire alarm installations.
The SIGA-SD operates on compatible Edwards Signature Series Signaling Line Circuits (SLC) and receives operating power directly from the Signature loop. Electronic addressing is assigned automatically by the Signature Loop Controller or through compatible programming software.
An integral Form C alarm relay is provided for HVAC shutdown or auxiliary control functions. The detector also supports compatible remote alarm indicators and remote test/reset stations for convenient maintenance.
The SIGA-SD mounts directly to HVAC ductwork and utilizes separately ordered sampling tubes selected according to duct width. The sampling tube may be installed from either side of the housing and rotated to align correctly with airflow.
The clear removable cover provides convenient access to the detector, terminals, filters, sampling tube, and exhaust tube, simplifying routine inspection and maintenance without removing the housing from the duct.
Suitable for:
A duct smoke detector is intended to monitor smoke movement within HVAC systems and is not a substitute for open-area smoke detection.
Compatible with:
Always verify compatibility with the installed Edwards fire alarm control panel, Signature Loop Controller, detector model, sampling tube, duct dimensions, airflow conditions, firmware version, and project requirements before installation.
Manufacturer: Edwards
Parent Company: Carrier
Model: SIGA-SD
Series: Signature Series SuperDuct
Product Type: Intelligent Duct Smoke Detector
Detection Method: Smoke Sensing Chamber
Communication: Signature Data Circuit
Addressing: Electronic
Operating Voltage: 15.2–19.95 VDC
Air Velocity Range: 100–4,000 ft/min
Air Pressure Differential: 0.005–1.00 in. Water Column
Smoke Sensitivity: 0.79%–2.46% Obscuration per Foot
Alarm Test Response: Approximately 5 Seconds
Relay Output: One Form C Alarm Relay
Status Indicators: Green Power LED and Red Alarm LED
Wire Size: 14–22 AWG
Operating Temperature: –4°F to 158°F (–20°C to 70°C)
Operating Humidity: 10%–93% RH Non-Condensing
Dimensions: 8.70 × 5.45 × 1.90 in. (221 × 138 × 48 mm)
Sampling Tube: Ordered Separately
Application: Indoor Commercial HVAC and Fire Alarm Systems
Listings: UL Listed, ULC Listed, FM Approved, CSFM Listed, and MEA Approved (application dependent). Verify product labeling and project requirements before installation.
The Edwards SIGA-SD is designed for commercial fire alarm systems requiring smoke detection within HVAC supply and return ductwork. Typical applications include office buildings, hospitals, schools, hotels, warehouses, industrial facilities, retail centers, mechanical rooms, and other commercial occupancies utilizing compatible Edwards Signature Series fire alarm systems.
| Weight | 2 lbs |
|---|---|
| Dimensions | 7 × 7 × 6 in |
There are no reviews yet.
Your Payment information is processed securely. We do not store credit card details, nor have access to your credit card information.
Select at least 2 products
to compare
Reviews
There are no reviews yet.