Description

The Fire-lite B350LP Plug-in Detector Base is used with Fire-Lite models CP350 ionization, SD350 and SD350T photoelectronic detectors; together with H350 and H350R heat detectors. Also, the Fire-lite B350LP base is intend for use in a 2-wire addressable system; with screw terminals provided for power (+ and –), and remote annunciator connections. Communication takes place over the power (+ and –) lines.

This detector base mounts directly to 3-1/2 inch and 4-inch octagon boxes, 4-inch square boxes and single gang boxes. To mount, remove the decorative ring by turning it in either direction to unhook the snaps; then separate the ring from the base. Install the base on the box using the screws supplied with the junction box and the appropriate mounting slots in the base. Place the decorative ring on the base and rotate it in either direction until it snaps into place.

All wiring must be install in compliance with all applicable local codes and any special requirements of the authority having jurisdiction, using the proper wire size. Besides, the conductors used to connect smoke detectors to control panels and accessory devices should be color-coded to reduce the likelihood of wiring errors. Improper connections can prevent a system from responding properly in the event of a fire.