Description
Edwards Kidde KI-PHD Intelligent Addressable Photoelectric and Heat Detector Head – 135°F
The Edwards Kidde KI-PHD is an intelligent addressable multisensor detector head designed for compatible Kidde VS and VM Series fire alarm control systems. This professional fire detection device combines photoelectric smoke sensing with fixed-temperature and rate-of-rise heat detection in a single compact assembly.
The KI-PHD uses forward-scattering optical technology to monitor airborne smoke particles associated with combustion. Additionally, its electronic thermal sensor monitors temperature conditions that may indicate a developing fire.
Furthermore, the detector incorporates onboard signal processing, automatic environmental compensation, continuous self-diagnostics, and intelligent communication with compatible Kidde fire alarm control equipment.
Its low-profile white housing supports approved commercial and institutional fire alarm installations.
The manufacturer identifies this model in datasheet K85001-0650 and installation sheet P/N 3102466-EN.
Intelligent Photoelectric and Thermal Detection
The Kidde KI-PHD combines two complementary fire detection technologies.
Its photoelectric sensing chamber uses forward-scattering reflective technology to detect airborne smoke particles. This sensing method responds to a range of combustion conditions, including smoke associated with slow-developing fires involving common building materials.
Additionally, the detector incorporates an electronic heat sensor with a fixed-temperature alarm rating of 135°F (57.2°C).
The thermal sensor also supports rate-of-rise detection at approximately 15°F per minute.
Together, these sensing elements provide smoke and temperature information to the detector’s intelligent processing circuitry.
Depending on the approved control panel configuration, the device can operate as a combined detector or provide separate smoke and heat alarm signals.
However, the KI-PHD does not contain a carbon monoxide sensor.
Key Features and Benefits
The Edwards Kidde KI-PHD offers several features for compatible professional fire alarm installations:
- Intelligent addressable photoelectric smoke and heat detection.
- Forward-scattering reflective optical sensing technology.
- Fixed-temperature heat detection rated at 135°F (57.2°C).
- Rate-of-rise heat detection rated at 15°F per minute.
- Compatible with approved Kidde VS and VM Series fire alarm systems.
- Intelligent communication with compatible loop controllers.
- Automatic device addressing through the supported control system.
- Smoke and heat alarm processing in a single detector head.
- Programmable smoke sensitivity through compatible control equipment.
- Smoke sensitivity range of 0.53–3.94% obscuration per foot.
- Continuous self-diagnostics and maintenance monitoring.
- Automatic environmental compensation.
- Green LED indication during normal operation.
- Red LED indication during alarm conditions.
- Operating voltage range of 15.20–19.95VDC.
- Normal operating current of approximately 51 microamps.
- Alarm current of approximately 68 microamps.
- White high-impact engineering polymer housing.
- Compatible standard, relay, isolator, and audible mounting bases.
- Manufacturer-documented UL 268, UL 268A, UL 521, and applicable ULC standards.
Advanced Optical Smoke Sensing
The KI-PHD uses a photoelectric sensing chamber to monitor smoke particles entering the detector.
When airborne particles scatter light inside the chamber, the sensor evaluates the resulting optical signal.
Its onboard electronics process this information and communicate relevant conditions to the connected fire alarm system.
Furthermore, the detector can report sensitivity information to compatible control equipment.
This capability helps maintenance personnel evaluate detector performance and identify sensing chambers that require inspection.
However, smoke detection performance depends on the fire characteristics, installation location, environmental conditions, and proper maintenance.
Fixed-Temperature Heat Detection
The KI-PHD includes a fixed-temperature heat sensor rated at 135°F (57.2°C).
The manufacturer’s installation instructions identify an actual alarm point range of approximately 129°F to 141°F under the applicable test conditions.
This function provides thermal detection when the surrounding temperature reaches the detector’s specified threshold.
Additionally, the heat sensing element complements the photoelectric sensor.
However, installers must follow the manufacturer’s spacing and application requirements when using the device for heat detection.
Rate-of-Rise Heat Detection
The KI-PHD also monitors the rate at which surrounding temperature increases.
The manufacturer specifies a rate-of-rise rating of 15°F per minute.
This function helps recognize certain rapidly developing fire conditions before the fixed-temperature threshold is reached.
Furthermore, the connected control panel can process the heat sensing information according to its approved configuration.
However, rate-of-rise performance depends on environmental conditions and the system’s supported programming.
Intelligent Addressable Communication
The Edwards Kidde KI-PHD communicates with compatible Kidde intelligent fire alarm control equipment.
Unlike conventional detectors, addressable devices provide individual identification through the connected signaling line circuit.
This allows maintenance personnel to identify the location reporting an alarm or trouble condition.
Furthermore, the KI-PHD belongs to the electronically addressed KI Series rather than the rotary-addressed KIR Series.
Consequently, buyers should not confuse the KI-PHD with the KIR-PHD, even though both models provide photoelectric and heat sensing.
The exact control panel and loop controller must support the selected detector model.
Compatibility with Kidde VS and VM Systems
The manufacturer’s datasheet identifies the KI-PHD as compatible with Kidde VS and VM Series fire alarm control panels.
These systems provide the intelligent communication and processing required by the detector.
Furthermore, compatible control equipment can monitor detector sensitivity and support maintenance reporting.
However, the KI-PHD should not be assumed compatible with every Edwards EST Signature system.
Its communication and installation requirements must match the approved Kidde control equipment.
Qualified technicians should verify the exact panel model, firmware, device compatibility list, and loop configuration.
Programmable Smoke Sensitivity
The KI-PHD supports programmable smoke sensitivity through compatible control panel software.
The manufacturer’s published sensitivity range extends from 0.53% to 3.94% obscuration per foot.
This allows qualified technicians to configure the detector according to the approved fire alarm design.
Additionally, the connected system can monitor detector sensitivity and generate maintenance information.
However, sensitivity settings must follow applicable fire alarm standards and the manufacturer’s programming instructions.
Environmental Compensation and Self-Diagnostics
The KI-PHD includes automatic environmental compensation.
Over time, dust and other airborne particles may accumulate inside an optical sensing chamber.
The detector monitors changes in its sensing characteristics and compensates within its designed operating limits.
Furthermore, continuous self-diagnostics help identify certain abnormal operating conditions.
Compatible control equipment can receive maintenance information when the sensor requires attention.
However, environmental compensation does not eliminate the need for periodic cleaning, inspection, and functional testing.
LED Status Indication
The Edwards Kidde KI-PHD features a local LED status indicator.
During normal operation, the green LED flashes.
When the detector enters an alarm or active condition, the red LED flashes.
These indicators help qualified personnel identify device activity during inspection and troubleshooting.
Furthermore, the detector supports compatible remote indication accessories when the approved installation requires them.
Electrical Specifications and Performance
The KI-PHD operates through a compatible intelligent signaling line circuit.
The manufacturer’s installation instructions identify the following characteristics:
- Operating voltage: 15.20–19.95VDC.
- Normal operating current: 51 microamps.
- Alarm current: 68 microamps.
- Fixed-temperature rating: 135°F (57.2°C).
- Rate-of-rise rating: 15°F per minute.
- Smoke sensitivity: 0.53–3.94% obscuration per foot.
- Air velocity range: 0–4,000 feet per minute.
- Operating temperature: 32°F to 100°F (0°C to 38°C).
- Relative humidity: 0–93%, non-condensing.
These specifications support approved Kidde intelligent fire alarm installations.
However, installers must verify signaling circuit capacity, mounting requirements, and control panel compatibility.
The KI-PHD is not a standalone battery-powered residential alarm.
Compatible Mounting Bases and Accessories
The KI-PHD supports several manufacturer-documented Kidde intelligent detector bases.
Relevant accessories include:
- KI-SB: Standard detector mounting base.
- KI-SB4: Four-inch standard mounting base with trim skirt.
- KI-RB: Relay detector mounting base.
- KI-RB4: Four-inch relay mounting base.
- KI-IB: Fault isolator mounting base.
- KI-IB4: Four-inch fault isolator mounting base.
- KI-ABST: Audible sounder base.
- KI-ABDT: Compatible audible detector base.
- KI-ABLT: Low-frequency audible base.
- GSA-SB and GSA-SB4: Additional standard bases identified in the installation instructions.
- GSA-LED: Remote alarm indicator for approved arrangements.
- KI-DMP: Duct detector mounting plate for compatible applications.
The manufacturer’s installation sheet also identifies additional compatible GSA relay, isolator, and audible bases.
However, the KI-PHD product designation refers to the detector head itself.
Mounting bases, sounders, mounting plates, and additional accessories are separate unless specifically included with the actual product.
Indoor Installation and Environmental Requirements
The KI-PHD supports approved indoor fire detection installations.
The manufacturer specifies an operating temperature range of 32°F to 100°F and relative humidity up to 93%, non-condensing.
Additionally, the detector supports documented airflow conditions up to 4,000 feet per minute.
For approved duct applications, Kidde specifies a compatible duct mounting plate and additional installation requirements.
However, technicians must verify the complete installation arrangement and environmental conditions before using the detector in an HVAC duct.
KI-PHD Versus KIR-PHD and KI-OSHD
The KI-PHD belongs to the electronically addressed Kidde KI Series.
By comparison, the KIR-PHD uses rotary address switches and has separate manufacturer documentation.
Although both models combine photoelectric and heat sensing, their addressing methods and system compatibility requirements differ.
Additionally, the newer KI-OSHD belongs to the Intelligent Optica family and has been identified by distributors as the replacement for the discontinued KI-PHD.
However, replacement compatibility must be verified against the exact control panel and manufacturer-approved device list.
Do not assume that a newer model is a direct substitute in every installation.
Commercial and Institutional Applications
The Edwards Kidde KI-PHD supports approved smoke and heat detection in suitable buildings.
Potential applications include:
- Commercial office buildings.
- Educational facilities and universities.
- Healthcare and institutional properties.
- Hotels and hospitality buildings.
- Retail and commercial premises.
- Public corridors and common areas.
- Suitable storage facilities.
- Existing Kidde VS and VM fire alarm installations.
- Professional fire alarm maintenance projects.
Furthermore, its combined sensing technologies can provide flexible detection options where the approved system design permits.
Nevertheless, qualified professionals must evaluate detector placement, system programming, environmental conditions, and applicable fire safety requirements.
Product Identification and Condition
The Edwards Kidde KI-PHD is a manufacturer-documented intelligent multisensor detector head.
Its combination of photoelectric smoke sensing, 135°F heat detection, rate-of-rise sensing, and intelligent communication supports compatible professional fire alarm systems.
Manufacturer datasheet K85001-0650 and installation sheet 3102466-EN provide technical specifications, compatible bases, testing requirements, and historical certification references.
The KI-PHD is identified as discontinued by specialist distributors.
However, manufacturer documentation does not independently establish the physical condition, certification markings, or remaining suitability of an individual detector.
Before purchasing, review the actual product photographs to confirm the complete KI-PHD model number, manufacturer label, manufacturing date, housing condition, and included components.
Finally, qualified fire alarm professionals should verify compatibility, inspect the detector, install it according to Kidde instructions, and perform the required functional and sensitivity testing before placing it into service.





Reviews
There are no reviews yet.