Description
Notifier FSP-951 Intelligent Addressable Photoelectric Smoke Detector – White
The Notifier FSP-951 is an intelligent addressable photoelectric smoke detector from Honeywell NOTIFIER. This professional fire alarm sensor uses advanced optical smoke detection technology to identify smoke particles from a wide range of combustion sources. Furthermore, its intelligent communication capabilities support individual detector identification, sensitivity monitoring, and efficient fire alarm system maintenance.
The Notifier FSP-951 belongs to the manufacturer’s FSP-951 Series of intelligent plug-in smoke detectors. Its modern, low-profile white housing provides a clean appearance for commercial and institutional interiors. Additionally, the detector communicates through the NOTIFIER FlashScan protocol, making it suitable for compatible addressable fire alarm control systems.
As a result, the FSP-951 offers a practical solution for commercial fire alarm installations, system upgrades, and compatible detector replacements.
Advanced Photoelectric Smoke Detection Technology
The Notifier FSP-951 uses an enhanced optical sensing chamber to monitor airborne smoke particles associated with combustion.
When smoke enters the chamber, the detector measures changes in scattered light. It then communicates smoke density information to the connected fire alarm control panel.
Additionally, the control panel evaluates this information to identify potential smoke alarm conditions. Consequently, maintenance personnel can locate individual detection points and respond efficiently to system events.
Unlike conventional non-addressable smoke detectors, the FSP-951 provides intelligent analog communication and individual device identification.
Moreover, the detector supports sensitivity monitoring through compatible control panel software.
Key Features and Benefits
The Notifier FSP-951 offers several important features for professional fire alarm applications:
- Photoelectric smoke detection: Uses an enhanced optical sensing chamber to monitor smoke particles.
- Intelligent addressable operation: Supports individual detector identification within compatible NOTIFIER systems.
- FlashScan communication: Works with compatible NOTIFIER FlashScan fire alarm control panels.
- Rotary address switches: Allow technicians to assign individual detector addresses.
- Adjustable smoke sensitivity: Supports panel-based sensitivity configuration and monitoring.
- Dual multicolor LEDs: Provide red, green, and amber status indication.
- 15–32VDC operation: Supports compatible addressable signaling line circuits.
- Low standby current: Draws approximately 200 microamps at 24VDC under specified conditions.
- Remote annunciator support: Works with the optional RA100Z remote LED indicator.
- Plug-in construction: Simplifies installation, inspection, and replacement.
- Tamper-resistant capability: Supports secure installation with compatible mounting bases.
- Magnetic testing: Supports manufacturer-approved functional testing.
- Flexible mounting: Works with approved standard and specialty detector bases.
- Low-profile white housing: Provides a professional appearance for indoor installations.
Intelligent FlashScan Addressable Communication
The Notifier FSP-951 uses Honeywell NOTIFIER’s FlashScan communication protocol to exchange information with compatible fire alarm control panels.
Furthermore, the detector includes rotary decimal address switches that allow technicians to configure individual device addresses.
The detector supports point addressing up to 159 addresses, subject to the connected control panel’s limitations.
Additionally, the system regularly polls the detector to monitor its operating condition and smoke density information.
Consequently, technicians can identify specific detector locations and investigate alarm or maintenance conditions more efficiently.
The FSP-951 supports FlashScan communication only. Therefore, buyers should not confuse it with the ivory FSP-951-IV, which supports both FlashScan and CLIP protocols.
Adjustable Smoke Sensitivity and Maintenance Monitoring
The Notifier FSP-951 supports smoke sensitivity adjustments through compatible fire alarm control panel software.
Furthermore, the connected system continuously monitors detector sensitivity and reports relevant information to the control panel.
This capability helps maintenance personnel identify contamination or operating conditions that may affect detector performance.
Additionally, compatible systems can provide maintenance notifications when the sensing chamber requires attention.
As a result, these features support preventive maintenance and help technicians maintain appropriate smoke detection performance.
Dual LED Indicators and Remote Annunciation
The Notifier FSP-951 includes two multicolor LED indicators that provide visible detector status information.
The connected control panel controls these indicators and can activate red, green, or amber illumination.
Additionally, the LEDs support steady, blinking, or inactive states according to the system configuration.
The detector also supports an optional RA100Z remote LED annunciator. This accessory provides additional status indication when an installation requires remote monitoring.
Therefore, technicians can configure visual status functions according to the capabilities of the connected fire alarm system.
Reliable Electrical Performance
The Notifier FSP-951 operates within a voltage range of 15–32VDC through a compatible addressable signaling line circuit.
Furthermore, the manufacturer specifies a typical operating current of approximately 200 microamps at 24VDC under defined communication conditions.
The detector draws approximately 2 mA during alarm operation with the red LED illuminated. Additionally, maximum current can reach 4.5 mA under specified amber LED operating conditions.
These electrical characteristics support efficient operation on appropriately designed NOTIFIER addressable fire alarm circuits.
However, installers must verify signaling line circuit capacity and electrical compatibility before installation.
Environmental Performance and Low-Profile Construction
The Notifier FSP-951 features a durable, low-profile housing suitable for approved indoor applications.
The manufacturer specifies an operating temperature range from 32°F to 122°F (0°C to 50°C).
Additionally, the detector supports relative humidity levels from 10% to 93%, non-condensing.
The FSP-951 also supports air velocities from 0 to 4,000 feet per minute under the manufacturer’s specified conditions.
When technicians install the detector in a B300-6 mounting base, the complete assembly measures approximately 2 inches high and 6.2 inches in diameter.
Furthermore, the detector head weighs approximately 3.4 ounces.
Its compact construction provides a professional appearance for commercial ceilings and other approved mounting locations.
Flexible Installation and Compatible Mounting Bases
The Notifier FSP-951 features a convenient plug-in design that simplifies installation, servicing, and detector replacement.
Technicians can install the detector using compatible NOTIFIER mounting bases, including:
- B300-6: Standard 6-inch mounting base.
- B501: Standard low-profile mounting base.
- B300-6-IV: Ivory mounting base for compatible color-matched applications.
- Approved specialty bases: Selected relay, isolator, and sounder bases, depending on system compatibility.
Furthermore, the detector supports an optional tamper-resistant feature through compatible mounting bases.
Its removable sensor head allows technicians to service the detector without replacing the complete mounting arrangement.
However, mounting bases and accessories are separate unless the actual product package specifically includes them.
Compatibility with NOTIFIER Fire Alarm Systems
The Notifier FSP-951 communicates with compatible NOTIFIER intelligent addressable fire alarm control panels that support FlashScan.
Its individual point identification capability allows the control panel to monitor each detector independently.
Furthermore, the manufacturer identifies the FSP-951 Series as a replacement generation for the earlier FSP-851 detector family.
However, installers must verify the specific control panel model, firmware, communication protocol, and approved device configuration before replacing an existing detector.
The FSP-951 is a photoelectric smoke detector only. It does not include the 135°F thermal sensing element found in the separate FSP-951T model.
Therefore, buyers should confirm the exact model number before selecting a replacement.
Commercial and Institutional Fire Alarm Applications
The Notifier FSP-951 supports intelligent smoke detection in a variety of compatible indoor facilities.
Common applications include:
- Commercial office buildings
- Educational facilities and schools
- Healthcare and institutional properties
- Hotels and hospitality buildings
- Apartment buildings and residential complexes
- Retail stores and commercial properties
- Warehouses and suitable industrial facilities
- Existing NOTIFIER fire alarm system maintenance projects
Furthermore, its intelligent communication and sensitivity monitoring features support efficient fire alarm maintenance.
Nevertheless, qualified fire alarm professionals must evaluate detector placement, environmental conditions, spacing, and applicable fire safety requirements.
Genuine Honeywell NOTIFIER Fire Detection Equipment
The Notifier FSP-951 is a genuine model from the Honeywell NOTIFIER intelligent photoelectric smoke detector family.
Its combination of optical smoke sensing, FlashScan communication, rotary addressing, and sensitivity monitoring makes it a practical option for compatible commercial fire alarm installations.
Additionally, manufacturer documentation identifies the FSP-951 under UL 268 for open-area smoke detection and UL 268A for approved duct applications.
Before purchasing, review the actual product photographs to confirm the exact model number, white housing, manufacturer labeling, physical condition, and included components.
Finally, qualified fire alarm professionals should verify compatibility, complete installation, and perform appropriate functional testing before placing the detector into service.





Reviews
There are no reviews yet.