- Fast Shipping
- Huge Inventory
- Trusted by Contractors
- 24/7 Ordering
The Mircom MIX-2000 Intelligent Mounting Base is a standard 4-inch flangeless detector base designed for compatible Mircom intelligent addressable smoke and heat detectors. Its low-profile construction provides a clean installation while supporting Mircom’s MIX-3000 Series detector family.
The MIX-2000 uses Mircom’s MIX-ADD address card system, which stores detector location information in the mounting base. As a result, compatible detectors can be replaced without requiring the location address to be manually recreated at the detector.
The Mircom MIX-2000 provides the physical and electrical mounting point for compatible intelligent addressable detectors. Mircom identifies it as a 4-inch standard base with no flange, making it suitable for installations where a compact mounting profile is preferred.
Its design allows compatible detectors to plug directly into the base while maintaining their connection to the addressable fire alarm circuit.
A major feature of the MIX-2000 is its use of the MIX-ADD address card. Instead of storing the detector’s location information exclusively in the detector itself, a coded address card is inserted into the mounting base.
When a compatible Alpha Series detector is installed, it reads the address from the card. Therefore, technicians can replace a detector while retaining its assigned location information, helping simplify maintenance and reduce addressing errors.
Mircom documentation identifies the MIX-2000 standard base for use with detectors including the MIX-3000, MIX-3100, MIX-3200, and MIX-3300 models. These models cover ionization smoke, photoelectric smoke, multi-sensor, and heat detection applications within the compatible system family.
This common mounting platform can simplify detector installation and replacement across compatible fire alarm applications.
The Mircom MIX-2000 has a diameter of approximately 4 inches (102 mm) and features a flangeless design. Mircom specifies an environmental temperature range of 32°F to 120°F (0°C to 49°C) and a humidity range of 10% to 93% RH, noncondensing for the mounting base series.
The MIX-2000 can support addressable fire detection installations in offices, schools, hotels, healthcare facilities, commercial buildings, and institutional properties using compatible Mircom equipment.
Because the detector address resides in the base through the MIX-ADD card, detector servicing and replacement can be more straightforward. This design is particularly useful in facilities with numerous addressable detectors where maintaining accurate device locations is important.
| Weight | 2 lbs |
|---|---|
| Dimensions | 8 × 8 × 8 in |
| Brand |
Your Payment information is processed securely. We do not store credit card details, nor have access to your credit card information.
Orders ship same day
Thousands of parts in stock
Reliable products & service
Order anytime, anywhere
The Mircom MIX-2000 Intelligent Mounting Base is a standard 4-inch flangeless detector base designed for compatible Mircom intelligent addressable smoke and heat detectors. Its low-profile construction provides a clean installation while supporting Mircom’s MIX-3000 Series detector family.
The MIX-2000 uses Mircom’s MIX-ADD address card system, which stores detector location information in the mounting base. As a result, compatible detectors can be replaced without requiring the location address to be manually recreated at the detector.
The Mircom MIX-2000 provides the physical and electrical mounting point for compatible intelligent addressable detectors. Mircom identifies it as a 4-inch standard base with no flange, making it suitable for installations where a compact mounting profile is preferred.
Its design allows compatible detectors to plug directly into the base while maintaining their connection to the addressable fire alarm circuit.
A major feature of the MIX-2000 is its use of the MIX-ADD address card. Instead of storing the detector’s location information exclusively in the detector itself, a coded address card is inserted into the mounting base.
When a compatible Alpha Series detector is installed, it reads the address from the card. Therefore, technicians can replace a detector while retaining its assigned location information, helping simplify maintenance and reduce addressing errors.
Mircom documentation identifies the MIX-2000 standard base for use with detectors including the MIX-3000, MIX-3100, MIX-3200, and MIX-3300 models. These models cover ionization smoke, photoelectric smoke, multi-sensor, and heat detection applications within the compatible system family.
This common mounting platform can simplify detector installation and replacement across compatible fire alarm applications.
The Mircom MIX-2000 has a diameter of approximately 4 inches (102 mm) and features a flangeless design. Mircom specifies an environmental temperature range of 32°F to 120°F (0°C to 49°C) and a humidity range of 10% to 93% RH, noncondensing for the mounting base series.
The MIX-2000 can support addressable fire detection installations in offices, schools, hotels, healthcare facilities, commercial buildings, and institutional properties using compatible Mircom equipment.
Because the detector address resides in the base through the MIX-ADD card, detector servicing and replacement can be more straightforward. This design is particularly useful in facilities with numerous addressable detectors where maintaining accurate device locations is important.
| Weight | 2 lbs |
|---|---|
| Dimensions | 8 × 8 × 8 in |
| Brand |
There are no reviews yet.
Your Payment information is processed securely. We do not store credit card details, nor have access to your credit card information.
Select at least 2 products
to compare
Reviews
There are no reviews yet.