- Fast Shipping
- Huge Inventory
- Trusted by Contractors
- 24/7 Ordering
The Notifier FPTI-951 is a commercial addressable multi criteria detector designed for compatible Notifier intelligent fire alarm systems. It combines smoke, heat, and infrared (PTIR) sensing technologies into a single detector to provide enhanced fire detection while improving immunity to nuisance alarms caused by dust, steam, and other non-fire particulates.
Using sophisticated multi-sensor algorithms, the detector analyzes multiple fire signatures simultaneously, allowing faster and more reliable detection of developing fires than traditional single-sensor detectors. Its low-profile plug-in design, programmable sensitivity, and continuous panel supervision simplify installation and long-term maintenance. This product is intended exclusively for commercial fire alarm installations.
The FPTI-951 operates on compatible Notifier FlashScan® addressable signaling line circuits (SLC) with an operating voltage range of 15–32 VDC. The detector continuously communicates with the fire alarm control panel, allowing programmable sensitivity, maintenance reporting, alarm verification, and precise device identification.
Rotary decimal switches simplify field addressing, while the detector installs on compatible Notifier intelligent detector bases including standard, relay, isolator, and sounder bases.
The FPTI-951 installs on compatible B300-6, B501, B210LP, B224RB, B224BI, and B200S detector bases. Its plug-in design allows quick installation, inspection, testing, cleaning, and replacement without disturbing field wiring.
The modern low-profile housing complements contemporary commercial interiors while simplifying routine maintenance.
Suitable for:
Compatible with:
Always verify compatibility with the installed fire alarm control panel, detector base, firmware version, and project requirements before installation. The FPTI-951 has been discontinued and replaced earlier-generation multi-criteria detectors in the Notifier product line.
Manufacturer: Notifier
Parent Company: Honeywell
Model: FPTI-951
Product Type: Addressable Multi Criteria Detector
Detection Method: Smoke, Heat, and Infrared (PTIR)
Heat Detection: 135°F (57°C) Fixed Temperature with Rate-of-Rise
Communication Protocol: FlashScan®
Operating Voltage: 15–32 VDC
Typical Standby Current: 200 µA @ 24 VDC
Addressing: Rotary Decimal Switches
Status Indicators: Dual LEDs
Operating Temperature: 32°F to 100°F (0°C to 38°C)
Operating Humidity: 15%–90% RH Non-Condensing
Air Velocity Rating: 0–300 ft/min (0–91.4 m/min)
Housing Color: White
Mounting: Compatible Notifier Detector Base Required
Application: Indoor Commercial Fire Alarm Systems
Product Status: Discontinued
Listings: UL 268 7th Edition, UL 521, ULC, FM Approved, and CSFM Listed (application dependent).
The Notifier FPTI-951 is designed for commercial fire alarm systems requiring advanced multi-sensor fire detection with enhanced immunity to nuisance alarms. Typical applications include office buildings, healthcare facilities, schools, hotels, data centers, retail centers, industrial facilities, warehouses, and other commercial occupancies where rapid, reliable fire detection is critical.
| Weight | 2 lbs |
|---|---|
| Dimensions | 5 × 5 × 5 in |
Your Payment information is processed securely. We do not store credit card details, nor have access to your credit card information.
Orders ship same day
Thousands of parts in stock
Reliable products & service
Order anytime, anywhere
The Notifier FPTI-951 is a commercial addressable multi criteria detector designed for compatible Notifier intelligent fire alarm systems. It combines smoke, heat, and infrared (PTIR) sensing technologies into a single detector to provide enhanced fire detection while improving immunity to nuisance alarms caused by dust, steam, and other non-fire particulates.
Using sophisticated multi-sensor algorithms, the detector analyzes multiple fire signatures simultaneously, allowing faster and more reliable detection of developing fires than traditional single-sensor detectors. Its low-profile plug-in design, programmable sensitivity, and continuous panel supervision simplify installation and long-term maintenance. This product is intended exclusively for commercial fire alarm installations.
The FPTI-951 operates on compatible Notifier FlashScan® addressable signaling line circuits (SLC) with an operating voltage range of 15–32 VDC. The detector continuously communicates with the fire alarm control panel, allowing programmable sensitivity, maintenance reporting, alarm verification, and precise device identification.
Rotary decimal switches simplify field addressing, while the detector installs on compatible Notifier intelligent detector bases including standard, relay, isolator, and sounder bases.
The FPTI-951 installs on compatible B300-6, B501, B210LP, B224RB, B224BI, and B200S detector bases. Its plug-in design allows quick installation, inspection, testing, cleaning, and replacement without disturbing field wiring.
The modern low-profile housing complements contemporary commercial interiors while simplifying routine maintenance.
Suitable for:
Compatible with:
Always verify compatibility with the installed fire alarm control panel, detector base, firmware version, and project requirements before installation. The FPTI-951 has been discontinued and replaced earlier-generation multi-criteria detectors in the Notifier product line.
Manufacturer: Notifier
Parent Company: Honeywell
Model: FPTI-951
Product Type: Addressable Multi Criteria Detector
Detection Method: Smoke, Heat, and Infrared (PTIR)
Heat Detection: 135°F (57°C) Fixed Temperature with Rate-of-Rise
Communication Protocol: FlashScan®
Operating Voltage: 15–32 VDC
Typical Standby Current: 200 µA @ 24 VDC
Addressing: Rotary Decimal Switches
Status Indicators: Dual LEDs
Operating Temperature: 32°F to 100°F (0°C to 38°C)
Operating Humidity: 15%–90% RH Non-Condensing
Air Velocity Rating: 0–300 ft/min (0–91.4 m/min)
Housing Color: White
Mounting: Compatible Notifier Detector Base Required
Application: Indoor Commercial Fire Alarm Systems
Product Status: Discontinued
Listings: UL 268 7th Edition, UL 521, ULC, FM Approved, and CSFM Listed (application dependent).
The Notifier FPTI-951 is designed for commercial fire alarm systems requiring advanced multi-sensor fire detection with enhanced immunity to nuisance alarms. Typical applications include office buildings, healthcare facilities, schools, hotels, data centers, retail centers, industrial facilities, warehouses, and other commercial occupancies where rapid, reliable fire detection is critical.
| Weight | 2 lbs |
|---|---|
| Dimensions | 5 × 5 × 5 in |
There are no reviews yet.
Your Payment information is processed securely. We do not store credit card details, nor have access to your credit card information.
Select at least 2 products
to compare
Reviews
There are no reviews yet.