Description

The Siemens HMS-2S Pull Station from Siemens Canada Limited through their sophisticated control-panel communication. Provide the most advanced method of address to the program and supervise the currently available to the fire industry. In other words Models HMS-SA and HMS-2S are the essences of an intelligent, initiating device through built-in microcomputer-chip technology. As well as each station’s sophisticated, bi-directional communication capabilities with FireFinder XLS. The pull switch and the second-stage key Switch are fully identifiable; and only one (1) pair of wires is need it for the Siemens HMS-2S Pull Station.

On the second-stage, the alarm will activate the key switch to “ON.” The pull switch and the second-stage key Switch are correspondingly fully detectable, and only one (1) pair of wires is necessary for Model HMS-2S.

This is built of course in a strong, molded polycarbonate material, which is matte finish in red with raised white lettering. The housing for each station accommodates the pull-down lever which was operating locks in position,also, will indicate the manual station has been activate. The pull-down lever stays down and locked until the manual station is reset; via initially will open the hinged and use a cover with an Allen Key, following the closing and locking the cover.

Features / Specifications

• Two Wire Operation.
• Surface or Semi flush Installation.
• DPU Programs and Verifies Deviceís.
• Address and Tests Deviceís Functionality.
• Electronic Address Programming is Easier and More Dependable.
• Single and Double Action Models Available.