Description

Siemens WFPAS-R Weatherproof Plate

Notification Appliances

Mounting Notes

The mounting options figures show the maximum number of field wires (conductors). That can enter the back box used with each mounting option.
If these limits a r e exceeded, there may – insufficient space in the back box to accommodate the field wires. And stresses from the wires could damage the product.
The limits shown for each mounting option comply with the National Electrical Code (NEC). Siemens recommends the use of the largest backbox option. And the use of approved field wires to provide additional wiring room for easy
installation and minimum stress on the product from the wiring.

Siemens WFPAS-R Weatherproof Plate

Mounting hardware for each mounting option supplied.
Conduit entrances to the back box should – selected to provide sufficient wiring clearance for the installed product.
Use Steel City #53151 (1-1/2” deep) or #53171 (2-1/8” deep) extension rings (as noted in the mounting options). Or equal with the same cut-out area.
Terminating field wires, do not use more lead length – required.
Excess lead length could result in insufficient wiring space for the appliance.

Use care and proper techniques to position the field wires in the back box. They use minimum space and produce minimum stress on the product. This – important for stiff, heavy gauge wires. And wires with thick insulation or sheathing.
Do not pass additional wires through the back box. The back box can – of sufficient size to permit additional wiring as described in NEC 314.16 (B)”. Such additional wires could result in insufficient wiring space for the appliance.

Datasheet

Relative Item