- Fast Shipping
- Huge Inventory
- Trusted by Contractors
- 24/7 Ordering
The Simplex 4090-9106 is a Class A Zone Adapter Module designed to provide an addressable interface between a conventional initiating device circuit and a Simplex IDNet or MAPNET II fire alarm system. It allows compatible conventional two wire initiating devices to be monitored as a single addressable point while maintaining Class A circuit operation.
The module features sealed electronics, onboard communication, LED status indication, and screw terminal wiring for dependable operation in commercial fire alarm systems. Its compact design fits within a standard electrical box, making installation and servicing straightforward.
The 4090-9106 communicates over the IDNet or MAPNET II signaling circuit and occupies one address on the communication loop. It supervises a Class A conventional initiating device circuit and reports its status to the fire alarm control panel.
The module includes screw terminal connections for field wiring and a visible LED that flashes during normal communication with the control panel. Device addressing is configured using an eight position DIP switch located beneath the resealable label.
The 4090-9106 is designed for installation inside a standard four inch square electrical box with an optional trim plate or cover. Its enclosed construction helps reduce dust infiltration while protecting internal electronics.
Optional semi flush and surface covers are available with a light pipe that allows the communication LED to remain visible after installation.
Suitable for:
Manufacturer: Simplex
Parent Company: Johnson Controls
Model: 4090-9106
Product Type: Class A Zone Adapter Module
Circuit Type: Class A Initiating Device Circuit
Communication: IDNet or MAPNET II
Addressing: Eight Position DIP Switch
Device Capacity: One Addressable Point
Status Indicator: Flashing LED Communication Indicator
Operating Voltage: 18 to 32 VDC Nominal
Maximum IDC Devices: Up to 20 Compatible Two Wire Initiating Devices
Mounting: Standard Four Inch Square Electrical Box
Wiring: Screw Terminal Connections
Operating Temperature: 32 Degrees Fahrenheit to 120 Degrees Fahrenheit
Relative Humidity: Up to 93 Percent Non Condensing
Application: Indoor Commercial Fire Alarm Systems
Listings: UL Listed, ULC Listed, FM Approved, and CSFM Listed. Verify product labeling, installation instructions, local codes, and project requirements before installation.
The Simplex 4090-9106 is designed for commercial fire alarm systems requiring the integration of conventional Class A initiating device circuits into an addressable fire alarm network. Typical applications include office buildings, hospitals, educational facilities, industrial plants, warehouses, government buildings, manufacturing facilities, and other commercial occupancies where conventional initiating devices must be monitored through an addressable system.
| Weight | 1 lbs |
|---|---|
| Dimensions | 6 × 6 × 6 in |
Your Payment information is processed securely. We do not store credit card details, nor have access to your credit card information.
Orders ship same day
Thousands of parts in stock
Reliable products & service
Order anytime, anywhere
The Simplex 4090-9106 is a Class A Zone Adapter Module designed to provide an addressable interface between a conventional initiating device circuit and a Simplex IDNet or MAPNET II fire alarm system. It allows compatible conventional two wire initiating devices to be monitored as a single addressable point while maintaining Class A circuit operation.
The module features sealed electronics, onboard communication, LED status indication, and screw terminal wiring for dependable operation in commercial fire alarm systems. Its compact design fits within a standard electrical box, making installation and servicing straightforward.
The 4090-9106 communicates over the IDNet or MAPNET II signaling circuit and occupies one address on the communication loop. It supervises a Class A conventional initiating device circuit and reports its status to the fire alarm control panel.
The module includes screw terminal connections for field wiring and a visible LED that flashes during normal communication with the control panel. Device addressing is configured using an eight position DIP switch located beneath the resealable label.
The 4090-9106 is designed for installation inside a standard four inch square electrical box with an optional trim plate or cover. Its enclosed construction helps reduce dust infiltration while protecting internal electronics.
Optional semi flush and surface covers are available with a light pipe that allows the communication LED to remain visible after installation.
Suitable for:
Manufacturer: Simplex
Parent Company: Johnson Controls
Model: 4090-9106
Product Type: Class A Zone Adapter Module
Circuit Type: Class A Initiating Device Circuit
Communication: IDNet or MAPNET II
Addressing: Eight Position DIP Switch
Device Capacity: One Addressable Point
Status Indicator: Flashing LED Communication Indicator
Operating Voltage: 18 to 32 VDC Nominal
Maximum IDC Devices: Up to 20 Compatible Two Wire Initiating Devices
Mounting: Standard Four Inch Square Electrical Box
Wiring: Screw Terminal Connections
Operating Temperature: 32 Degrees Fahrenheit to 120 Degrees Fahrenheit
Relative Humidity: Up to 93 Percent Non Condensing
Application: Indoor Commercial Fire Alarm Systems
Listings: UL Listed, ULC Listed, FM Approved, and CSFM Listed. Verify product labeling, installation instructions, local codes, and project requirements before installation.
The Simplex 4090-9106 is designed for commercial fire alarm systems requiring the integration of conventional Class A initiating device circuits into an addressable fire alarm network. Typical applications include office buildings, hospitals, educational facilities, industrial plants, warehouses, government buildings, manufacturing facilities, and other commercial occupancies where conventional initiating devices must be monitored through an addressable system.
| Weight | 1 lbs |
|---|---|
| Dimensions | 6 × 6 × 6 in |
There are no reviews yet.
Your Payment information is processed securely. We do not store credit card details, nor have access to your credit card information.
Select at least 2 products
to compare
Reviews
There are no reviews yet.