- Fast Shipping
- Huge Inventory
- Trusted by Contractors
- 24/7 Ordering
The Simplex GSA4098-9792 TrueAlarm Addressable Sensor Base is an intelligent standard detector base used with compatible Simplex TrueAlarm analog sensors. Simplex identifies 4098-9792 as its white Standard Sensor Base, providing the addressable electronics and electrical interface between a compatible sensor head and the fire alarm control unit.
The base communicates using MAPNET II or IDNet and continuously monitors the installed sensor. Sensor information is digitized and transmitted to the fire alarm control unit for processing, allowing each detector location to be individually identified and supervised.
The 4098-9792 contains the electronics required to interface a detachable TrueAlarm sensor with compatible Simplex addressable fire alarm equipment.
Published specifications identify:
Communication: MAPNET II or IDNet
Communication/Supervisory Voltage: 24–40 VDC with data
Typical Current: 400 µA
Addresses Required: 1 per base.
This architecture allows the control unit to monitor each detector location individually rather than treating multiple detectors as a single conventional zone.
The TrueAlarm architecture supports magnetically operated functional testing.
This allows technicians to perform a local functional test of the compatible detector without requiring removal of the sensor head from the base.
The 4098-9792 uses a locking anti-tamper design to help prevent unauthorized removal of the installed TrueAlarm sensor.
The feature is integrated into the base and can be used where detector security is required.
The 4098-9792 can be installed on:
4-inch octagonal box: 1-1/2-inch minimum depth
4-inch square box: 1-1/2-inch minimum depth
Single-gang box: 2-inch minimum depth.
Typical installation involves connecting the IDNet or MAPNET II circuit, securing the base to the electrical box, setting/verifying its address, installing the compatible TrueAlarm sensor head, and testing communication and alarm operation.
Simplex identifies 4098-9832 as an adapter plate for applicable surface or semi-flush mounting arrangements.
| Weight | 1 lbs |
|---|---|
| Dimensions | 8 × 8 × 4 in |
| Brand |
Your Payment information is processed securely. We do not store credit card details, nor have access to your credit card information.
Orders ship same day
Thousands of parts in stock
Reliable products & service
Order anytime, anywhere
The Simplex GSA4098-9792 TrueAlarm Addressable Sensor Base is an intelligent standard detector base used with compatible Simplex TrueAlarm analog sensors. Simplex identifies 4098-9792 as its white Standard Sensor Base, providing the addressable electronics and electrical interface between a compatible sensor head and the fire alarm control unit.
The base communicates using MAPNET II or IDNet and continuously monitors the installed sensor. Sensor information is digitized and transmitted to the fire alarm control unit for processing, allowing each detector location to be individually identified and supervised.
The 4098-9792 contains the electronics required to interface a detachable TrueAlarm sensor with compatible Simplex addressable fire alarm equipment.
Published specifications identify:
Communication: MAPNET II or IDNet
Communication/Supervisory Voltage: 24–40 VDC with data
Typical Current: 400 µA
Addresses Required: 1 per base.
This architecture allows the control unit to monitor each detector location individually rather than treating multiple detectors as a single conventional zone.
The TrueAlarm architecture supports magnetically operated functional testing.
This allows technicians to perform a local functional test of the compatible detector without requiring removal of the sensor head from the base.
The 4098-9792 uses a locking anti-tamper design to help prevent unauthorized removal of the installed TrueAlarm sensor.
The feature is integrated into the base and can be used where detector security is required.
The 4098-9792 can be installed on:
4-inch octagonal box: 1-1/2-inch minimum depth
4-inch square box: 1-1/2-inch minimum depth
Single-gang box: 2-inch minimum depth.
Typical installation involves connecting the IDNet or MAPNET II circuit, securing the base to the electrical box, setting/verifying its address, installing the compatible TrueAlarm sensor head, and testing communication and alarm operation.
Simplex identifies 4098-9832 as an adapter plate for applicable surface or semi-flush mounting arrangements.
| Weight | 1 lbs |
|---|---|
| Dimensions | 8 × 8 × 4 in |
| Brand |
There are no reviews yet.
Your Payment information is processed securely. We do not store credit card details, nor have access to your credit card information.
Select at least 2 products
to compare
Reviews
There are no reviews yet.