Description

The System Sensor RTS151 i s an automatic fire detector accessory designed to test a remotely located detector. Consult detector installation instructions for additional information.

The System Sensor RTS151 mounts to a single gang box (2 1/2” minimum depth), or directly to the wall or ceiling. With the magnet in place, some time will elapse (40 sec. maximum) depending on the detector type, b efore the alarm indicating LED will light.

Insert a 1/8˝ maximum diameter tool into the hole un til it stops and the LED turns off. The Remote Test Switches i s capable of resetting only certain System Sensor models of detectors. Refer to detector installation instructions for additional information.

The National Fire Protection Association has published codes, standards, and recommended practices for the installation and use of the above product. It i s recommended that the installer b e familiar with these requirements, with local codes. And any special requirements of the local authority having jurisdiction.

Features / Specifications

Dimensions: 4.8˝ H × 2.90˝ W × 1.4˝ D

Weight: .16 lbs.

Alarm LED: 2.8 – 32 VDC, 10 mA max.

Coil Current: 95 mA max

Test Switch: 10 VA @ 32 VDC

Reset Switch: 10 VA @ 32 VDC

Alarm Response Time: 40 sec. max.

Temperature: –10°C to 60°C (14°F to 140°F)

Humidity: 95% RH Non-condensing Max

Listing: UL, FM, CE