- Fast Shipping
- Huge Inventory
- Trusted by Contractors
- 24/7 Ordering
The System Sensor SPSCWLED-SP FUEGO Ceiling LED Speaker Strobe is a white, ceiling-mounted emergency voice and visual notification appliance from the System Sensor L-Series LED product family. It integrates a high-performance speaker with an energy-efficient LED strobe and is specifically marked FUEGO for Spanish-language fire alarm applications. Honeywell identifies the SPSCWLED-SP as a 2-wire, white ceiling speaker strobe with FUEGO marking.
The appliance provides seven field-selectable candela settings, supports both 25 VRMS and 70.7 VRMS speaker operation, and includes four selectable speaker power taps from ¼ to 2 watts. Its LED strobe technology reduces current draw compared to xenon-based devices, while its plug-in mounting system, rotary configuration switches, and built-in diagnostic test points simplify installation, commissioning, and maintenance.
The “-SP” suffix designates the Spanish FUEGO version of the SPSCWLED ceiling speaker strobe.
System Sensor documentation defines “-SP” models as FUEGO-marked devices, indicating Spanish-language fire alarm identification.
Model designation:
SPSCWLED-SP — 2-Wire LED Speaker Strobe, White, Ceiling, FUEGO
This makes the device suitable for installations requiring bilingual or Spanish-labeled life-safety notification appliances.
The SPSCWLED-SP uses LED-based visual notification technology instead of traditional xenon flash tubes.
Key advantages include:
The LED design also maintains consistent appearance across the System Sensor L-Series product line.
The SPSCWLED-SP provides seven field-selectable ceiling candela settings:
Candela selection is made using a rotary switch on the device.
Proper selection should be based on:
The speaker supports two standard fire alarm audio voltages:
This allows compatibility with most distributed fire alarm voice evacuation systems.
The selected voltage must match the connected fire alarm voice amplifier output.
The SPSCWLED-SP includes four speaker tap settings:
Higher wattage increases sound output but also increases amplifier load. Selection should be based on:
The speaker is designed for high-fidelity emergency voice reproduction with low distortion.
Typical system uses include:
All audio content is generated by the connected fire alarm voice evacuation system.
The SPSCWLED-SP can reproduce a 520 Hz ±10% square-wave tone when driven by a compatible fire alarm control panel.
This function depends on the external system; the speaker does not generate tones independently.
The device supports System Sensor Sync protocol for coordinated flashing of compatible visual appliances.
Synchronization may be provided by:
This ensures uniform flash timing across multiple devices in the same field of view.
The SPSCWLED-SP includes Digital Voltage Meter (DVM) test points on the face of the device.
These allow technicians to:
The L-Series design uses a plug-in mounting plate system.
Features include:
This reduces installation time and improves system reliability during construction phases.
The SPSCWLED-SP is electrically compatible (within listed limits) with:
This supports retrofit and system expansion applications, subject to control panel and power supply compatibility.
Actual current draw varies by candela setting and must be calculated using manufacturer data for proper NAC and power supply sizing.
Typical installation steps include:
Testing should confirm:
Suitable for:
The System Sensor SPSCWLED-SP FUEGO Ceiling LED Speaker Strobe is designed for applications requiring combined voice and visual emergency notification with Spanish-language identification, offering flexible audio configuration, low-current LED operation, and advanced diagnostic and synchronization features.
| Weight | 5 lbs |
|---|---|
| Dimensions | 8 × 8 × 8 in |
| Brand |
Your Payment information is processed securely. We do not store credit card details, nor have access to your credit card information.
Orders ship same day
Thousands of parts in stock
Reliable products & service
Order anytime, anywhere
The System Sensor SPSCWLED-SP FUEGO Ceiling LED Speaker Strobe is a white, ceiling-mounted emergency voice and visual notification appliance from the System Sensor L-Series LED product family. It integrates a high-performance speaker with an energy-efficient LED strobe and is specifically marked FUEGO for Spanish-language fire alarm applications. Honeywell identifies the SPSCWLED-SP as a 2-wire, white ceiling speaker strobe with FUEGO marking.
The appliance provides seven field-selectable candela settings, supports both 25 VRMS and 70.7 VRMS speaker operation, and includes four selectable speaker power taps from ¼ to 2 watts. Its LED strobe technology reduces current draw compared to xenon-based devices, while its plug-in mounting system, rotary configuration switches, and built-in diagnostic test points simplify installation, commissioning, and maintenance.
The “-SP” suffix designates the Spanish FUEGO version of the SPSCWLED ceiling speaker strobe.
System Sensor documentation defines “-SP” models as FUEGO-marked devices, indicating Spanish-language fire alarm identification.
Model designation:
SPSCWLED-SP — 2-Wire LED Speaker Strobe, White, Ceiling, FUEGO
This makes the device suitable for installations requiring bilingual or Spanish-labeled life-safety notification appliances.
The SPSCWLED-SP uses LED-based visual notification technology instead of traditional xenon flash tubes.
Key advantages include:
The LED design also maintains consistent appearance across the System Sensor L-Series product line.
The SPSCWLED-SP provides seven field-selectable ceiling candela settings:
Candela selection is made using a rotary switch on the device.
Proper selection should be based on:
The speaker supports two standard fire alarm audio voltages:
This allows compatibility with most distributed fire alarm voice evacuation systems.
The selected voltage must match the connected fire alarm voice amplifier output.
The SPSCWLED-SP includes four speaker tap settings:
Higher wattage increases sound output but also increases amplifier load. Selection should be based on:
The speaker is designed for high-fidelity emergency voice reproduction with low distortion.
Typical system uses include:
All audio content is generated by the connected fire alarm voice evacuation system.
The SPSCWLED-SP can reproduce a 520 Hz ±10% square-wave tone when driven by a compatible fire alarm control panel.
This function depends on the external system; the speaker does not generate tones independently.
The device supports System Sensor Sync protocol for coordinated flashing of compatible visual appliances.
Synchronization may be provided by:
This ensures uniform flash timing across multiple devices in the same field of view.
The SPSCWLED-SP includes Digital Voltage Meter (DVM) test points on the face of the device.
These allow technicians to:
The L-Series design uses a plug-in mounting plate system.
Features include:
This reduces installation time and improves system reliability during construction phases.
The SPSCWLED-SP is electrically compatible (within listed limits) with:
This supports retrofit and system expansion applications, subject to control panel and power supply compatibility.
Actual current draw varies by candela setting and must be calculated using manufacturer data for proper NAC and power supply sizing.
Typical installation steps include:
Testing should confirm:
Suitable for:
The System Sensor SPSCWLED-SP FUEGO Ceiling LED Speaker Strobe is designed for applications requiring combined voice and visual emergency notification with Spanish-language identification, offering flexible audio configuration, low-current LED operation, and advanced diagnostic and synchronization features.
| Weight | 5 lbs |
|---|---|
| Dimensions | 8 × 8 × 8 in |
| Brand |
There are no reviews yet.
Your Payment information is processed securely. We do not store credit card details, nor have access to your credit card information.
Select at least 2 products
to compare
Reviews
There are no reviews yet.