Description

The VESDA VEP-A00-1P-UL is an aspirating smoke detector designed for compatible commercial fire alarm systems requiring ultra-early smoke detection. Specifically, it continuously samples air through a single-pipe network and analyzes airborne particles using advanced laser detection technology to identify smoke before visible fire develops. This product is intended exclusively for commercial fire alarm installations and is not surveillance equipment, communications equipment, consumer electronics, tracking equipment, or recording devices.

Built for mission-critical applications, the VEP-A00-1P-UL features continuous air sampling, intelligent airflow monitoring, programmable alarm thresholds, and advanced diagnostics. In addition, its durable enclosure and integrated display indicators simplify installation, maintenance, and system monitoring.

Product Functions

The VESDA VEP-A00-1P-UL supports commercial fire alarm systems by providing:

• Continuous aspirating smoke detection
• Single-pipe air sampling
• Laser-based smoke analysis
• Ultra-early fire detection
• Programmable alarm thresholds
• Continuous airflow monitoring
• Seven programmable relay outputs
• Event logging and diagnostic monitoring
• Reliable operation with compatible fire alarm systems

Electrical & System Information

The VEP-A00-1P-UL operates from an 18–30 VDC power supply and is designed for single-pipe aspirating smoke detection systems. Furthermore, the detector continuously draws air through the sampling pipe while monitoring smoke concentration, airflow conditions, and detector health.

The detector supports programmable Alert, Action, Fire 1, and Fire 2 alarm thresholds, allowing installers to configure detection sensitivity according to the protected environment. Always verify compatibility before installation.

Features

Aspirating Smoke Detection

The VEP-A00-1P-UL continuously samples air through a dedicated pipe network rather than relying on passive smoke movement. As a result, it provides ultra-early fire detection for critical environments.

Laser Detection Technology

The detector uses advanced laser-based sensing to identify extremely small smoke particles. Consequently, it can detect developing fire conditions before conventional spot detectors activate.

Intelligent Airflow Monitoring

Integrated airflow monitoring continuously verifies sampling pipe performance. Therefore, the detector can identify blockages, leaks, or airflow abnormalities that may affect system operation.

AutoLearn Technology

AutoLearn automatically establishes alarm thresholds and airflow parameters based on the protected environment. In addition, this feature simplifies commissioning while improving long-term reliability.

Extensive Event Logging

The detector stores up to 20,000 events, including alarms, faults, user actions, smoke levels, and maintenance records. Consequently, technicians can review detailed system history during inspections.

Mounting & Design

The VESDA VEP-A00-1P-UL features a durable plastic enclosure with front-panel LED indicators for power, fault, airflow, smoke level, and alarm status. Furthermore, the compact enclosure simplifies installation in equipment rooms, telecommunications facilities, clean rooms, and data centers.

Its single-pipe design supports straightforward installation while providing dependable air sampling across large protected areas.

Protection & Applications

The VEP-A00-1P-UL is designed exclusively for commercial fire alarm systems requiring ultra-early smoke detection.

Typical applications include:

• Data Centers
• Telecommunications Facilities
• Clean Rooms
• Electrical Rooms
• Museums
• Archives
• Healthcare Facilities
• Industrial Plants
• Mission-Critical Infrastructure
• Commercial Buildings

Always install the detector according to local building codes, NFPA requirements, and the manufacturer’s installation instructions.

Compatibility

The VESDA VEP-A00-1P-UL is designed for use with compatible VESDA and Honeywell fire alarm systems utilizing aspirating smoke detection technology.

The detector supports:

• Single-pipe sampling networks
• VESDAnet communication
• Xtralis ASPIRE pipe design software
• Seven programmable relay outputs
• Remote monitoring and configuration tools

Before purchasing or installing this detector, verify compatibility with the intended fire alarm system and pipe network design.

Technical Specifications

Manufacturer: VESDA (Xtralis / Honeywell)

Model: VEP-A00-1P-UL

Product Type: Aspirating Smoke Detector

Detection Technology: Laser-Based Aspirating Smoke Detection

Sampling Configuration: Single Pipe

Operating Voltage: 18–30 VDC (24 VDC Nominal)

Maximum Current Consumption: 0.57 A (Quiescent), 0.59 A (Alarm)

Area Coverage: Up to 10,760 sq ft (1,000 m²)

Maximum Linear Pipe Length: 312 ft (95 m)

Maximum Branched Pipe Length: 427 ft (130 m)

Minimum Airflow per Pipe: 15 L/min

Sensitivity Range: 0.0015%–6.575% Obscuration per Foot

Measurement Range: 0.0000%–11.09% Obscuration per Foot

Alarm Levels: Alert, Action, Fire 1, Fire 2

Programmable Relays: 7 Form C Relays

Event Log Capacity: 20,000 Events

Operating Temperature: 32°F to 100°F (0°C to 38°C)

Sampled Air Temperature: -4°F to 140°F (-20°C to 60°C)

Relative Humidity: 5%–95% Non-Condensing

Enclosure: Plastic

Dimensions: 13.8 × 8.9 × 5.3 in (350 × 225 × 135 mm)

Weight: 9.7 lb (4.4 kg)

Ingress Rating: IP40

Listings: UL 268 7th Edition Listed (verify approvals for your specific application).

Applications

The VESDA VEP-A00-1P-UL is commonly installed in commercial fire alarm systems protecting:

• Data Centers
• Server Rooms
• Telecommunications Facilities
• Control Rooms
• Clean Rooms
• Museums
• Archives
• Hospitals
• Manufacturing Facilities
• Airports
• Commercial Buildings

Before installation, verify compliance with local codes, project specifications, and manufacturer recommendations to ensure proper system operation.

VEP-A00-1P-UL